manualshive.com logo in svg

Lenovo ideapad FLEX 5-1470, Hardware Maintenance Manual

The Lenovo ideapad FLEX 5-1470 is a versatile laptop that offers exceptional performance and flexibility. For easy troubleshooting and maintenance, download the free Hardware Maintenance Manual from manualshive.com, allowing you to optimize your device's performance and extend its lifespan.

Share
Download
background image

36

Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570 

Hardware Maintenance Manual

1050 PCI Express Mini Card for wireless LAN

For access, remove these FRUs in order:

• 

“1010 Base cover” on page 31

• 

“1020 Battery pack” on page 33

Important:

 The preinstalled WLAN module may only be replaced with a Lenovo 

approved module in order to comply with FCC and IC regulations. Refer to  

“Table 5. Parts list—Overall” on page 67 for Lenovo part numbers for the 

approved modules.

Figure 5. Removal steps of PCI Express Mini Card for wireless LAN

Peel off the sponge on the card 

1

.

1

Summary of Contents for ideapad FLEX 5-1470



















































































Reviews:

No comments

Related manuals for ideapad FLEX 5-1470

Brands by name

Popular brands

Load more brands