60
Lenovo ideapad 520S/320S Hardware Maintenance Manual
1160 EDP cable and integrated camera
For access, remove these FRUs in order:
• “1010 Base cover” on page 32
• “1020 Battery pack” on page 35
• “1030 Solid state disk” on page 36
• “1040 Hard disk drive” on page 37
• “1060 PCI Express Mini Card for wireless LAN” on page 40
• “1070 Fan and heat sink assembly” on page 43
• “1080 IO board” on page 46
• “1090 Speaker” on page 48
• “1100 Fingerprint module (Lenovo ideapad 520S-14IKB) (on select models)”
• “1110 System board” on page 50
• “1120 Upper case” on page 52
• “1140 LCD unit” on page 55
• “1150 LCD hinges” on page 58
Figure 16. Removal steps of EDP cable and integrated camera
Note:
The integrated camera is stuck on the top center of the LCD cover.
Detach the connector in the direction shown by arrow
1
, then remove the
camera board in the direction shown by arrow
2
.
2
1
When installing:
Stick the integrated camera to the top center of the LCD
cover and adjust the placement of it to make sure the connector is attached
firmly.