Unpack
Parts and locations
Holder installation
2
Connect the power cable and peripherals
ideacentre
stick 300
Holder AC power
adapter
Micro USB
to standard
USB 2.0
cable
1
HDMI
extension
cable
2
Publications
1. USB: Universal Serial Bus
2. HDMI: High-Definition Multimedia Interface
NOTE:
Some models may contain items that are not listed.
NOTE:
We recommend using a 2.4Ghz RF combo keyboard and
mouse, which are not included in this package. These accessories
can be purchased at www.lenovo.com. Alternatively, you can use
a USB hub with 2 or more ports to support a USB keyboard and
mouse.
NOTE:
Use the HDMI extension cable if it is inconvenient to connect
the stick PC to the television or LCD monitor directly.
NOTE:
Adjust the picture size or settings of your television or LCD
monitor if the image cannot be played in full screen mode or the
image runs beyond the screen.
For more technical support, go to: http://www.lenovo.com/support, and
then enter
“
Stick 300
”
in the product name search box and select the
Solutions
tab.
1
Connect the keyboard and mouse
3
Turn on the computer
Power indicator
USB 2.0 connector
Micro USB 2.0 connector
Power button
HDMI connector
Protective cap
Micro-SD-card slot
Holder
Air vents
Take the stick PC holder out of the package. The holder can be attached
to your television or LCD monitor. We recommend finding a suitable
place for the holder in case the cables are not long enough.
NOTE:
To attach the holder, find a flat, clean surface on your
television or LCD monitor. Then remove the backing paper and press
the holder down firmly on the surface.
NOTE:
The adhesive paper of the holder can be used only once.
ATTENTION:
Be sure not to block any air vents on the computer.
Blocked air vents may cause thermal problems.