manualshive.com logo in svg

Lenovo ideacentre 610s, Hardware Maintenance Manual

Share
Download
Lenovo ideacentre 610s Hardware Maintenance Manual Download Page 36

10. Reinstall the I/O board shield. See “Replacing the I/O board shield” on page 26.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 47.

Replacing the power button board

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1 .

To replace the power button board, do the following:

1. Remove all media from the drives and turn off all connected devices and the computer. Then,

disconnect all power cords from electrical outlets and all cables that are connected to the computer.

2. Remove the computer covers. See “Removing the computer covers” on page 23.

3. Disconnect the power button board cable from the power button board

4. Remove the power button board as shown.

Figure 15. Removing the power button board

5. Install the new power button board.

6. Connect the power button board cable to the new power button board.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 47.

Replacing the wireless card

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1 .

To replace the wireless card, do the following:

1. Remove all media from the drives and turn off all connected devices and the computer. Then,

disconnect all power cords from electrical outlets and all cables that are connected to the computer.

2. Remove the computer covers. See “Removing the computer covers” on page 23.

3. Remove the power button board. See “Replacing the power button board” on page 30.

30

ideacentre 610S Hardware Maintenance Manual

Summary of Contents for ideacentre 610s

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands