Lenovo HR650X V2, User Manual

Page: 157 / 192

Table 61. Tabs on the Remote Management Module home page (continued)
Tabs Comments
Image Redirection (Default
Disabled) Display images in the network to host as media through BMC.
Power Control Control power.
Maintenance Maintenance BMC configuration and firmware.
• Backup Configuration
• Firmware Image Location
• Firmware Information
• Firmware Update
• Preserve Configuration
• Restore Configuration
• Restore Factory Defaults
• System Administrator
System Administrator Terminate the current Web Console session.
Note: If the remote console (KVM) window is active, it will close automatically when you
are logging out. After logout, the Web console will back to logon screen.
There also are tabs on the top of the home page:
Table 62. Tabs on the top of the Remote Management Module home page
Tab
Comments
Message Display the messages received.
Notification Display the notification received.
BIOS BIOS setup.
Sync On/Off to Sync with latest sensor and eventlog updates.
Refresh Reloads the current page.
Username Display the current log-in user name.
Log out
To log out the Remote Management Module and turn back to the log on page, click Sign out on the left
down of the toolbar.
Note: Automatic Timeout: If the Web console detects no user activity within 5 minutes, the current session
will be automatically terminated. If the user has opened the KVM remote console window, then the Web
session will not automatically timeout. When the automatic timeout happens, the system will inform the user
to log on again if the user wants to access the Web console to take operations.
Remote Management Module Web console options
This topic describes every page of the Web console and each page is divided into several parts
corresponding separately to the several tabs at the left side of the panel. In each part, there are detailed
illustrations and introductions for each menu option.
Chapter 6
.
BMC Setup
149