Lenovo B4301, Hardware Maintenance Manual, Page: 76 / 104

Removal steps of DC-in connector and base cover
Remove the screws 1 , and then remove the DC-in connector in the direction shown by the arrow 2 .
2
1
1
Step Screw (quantity) Color
Torque
1
M2 × 3 mm, flat-head, nylon-coated (2) Black 1.85 kgf-cm
Applying labels to the base cover
The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when
you replace the base cover. For the labels which are not shipped with the new base cover, peel them off
from the old base cover, and adhere them to the new one.
Note: If you replace a part with the Windows Certificate of Authentication (COA) label 12 , return the old part
with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the
original location of the label on the computer and the information on the label, such as the part number,
serial number, and product key.
The following illustration shows the correct location of each label.
70
Hardware Maintenance Manual