Lenovo 90Q8 User Manual Download | Manualshive

Page: 9 / 98

background image

Rear

1. USB 2.0 connectors (4)

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.

2. USB-C

™

connector

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.

Note:

An appropriate adapter may be needed for connecting external devices.

3. USB 3.2 connectors Gen 1 (2)

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.

4. Audio connectors (6)

Send audio signals from the computer to external devices, such as powered
stereo speakers, headphones, or multimedia keyboards. To connect a stereo
system or other external recording device, connect a cable between the audio
line-in connector of the device and the audio line-out connector of the computer.

Note:

If your computer has both an audio line-out connector and a headset or

headphone connector, always use the headset or headphone connector for
earphones, headphones, or a headset. The headphone connector does not
support headset microphones.

Receive audio signals from an external audio device, such as a stereo system. To
connect an external audio device, connect a cable between the audio line-out
connector of the device and the audio line-in connector of the computer.

5. PCI-Express card area

Install PCI-Express cards into this area to improve the operating performance of
the computer. Depending on the computer model, the connectors in this area
vary.

6. Power cord connector

Connect the power cord to your computer for power supply.

.

Meet your computer

3

«
...
7
8
9
10
11
...
»

Summary of Contents for 90Q8



































































































Reviews:

No comments

Related manuals for 90Q8

Brand: IBM Pages: 86

Brand: C&T Pages: 99

Brand: Olivetti Pages: 118

Compute Stick STK1A32SC

Brand: Intel Pages: 11

Brand: MSI Pages: 53

Brand: HP Pages: 33

280 G5 SFF Business PC

Brand: HP Pages: 19

2133 Mini-Note PC

Brand: HP Pages: 4

Brand: HP Pages: 16

205 G2 AiO Business

Brand: HP Pages: 13

Brand: HP Pages: 60

Brand: HP Pages: 13

Brand: HP Pages: 6

Brand: HP Pages: 7

280 G3 Microtower Business

Brand: HP Pages: 10

Brand: HP Pages: 7

Brand: HP Pages: 10

Brand: HP Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands