manualshive.com logo in svg

Lenovo 7387, Hardware Maintenance Manual

The Lenovo 7387 Hardware Maintenance Manual offers comprehensive instructions and guidelines for the proper care and maintenance of your device. It is available for download free of charge from manualshive.com, allowing you to access this valuable resource effortlessly. Enhance your product experience and extend its lifespan with this essential manual.

Share
Download
background image

Replacing

 

the

 

CMOS

 

battery

 

If

 

the

 

CMOS

 

battery

 

fails,

 

the

 

date,

 

time,

 

and

 

configuration

 

information

 

(including

 

passwords)

 

are

 

lost.

 

An

 

error

 

message

 

is

 

displayed

 

when

 

you

 

turn

 

on

 

the

 

computer.

 

1.

   

Refer

 

to

 

“Safety

 

notices

 

(multi-lingual

 

translations)”

 

on

 

page

 

7

 

for

 

information

 

about

 

replacing

 

and

 

disposing

 

of

 

the

 

battery.

 

2.

   

Turn

 

off

 

the

 

computer

 

and

 

all

 

attached

 

devices.

 

3.

   

Remove

 

the

 

left-side

 

cover.

 

See

 

“Removing

 

the

 

covers”

 

on

 

page

 

84.

 

4.

   

Locate

 

the

 

battery.

 

See

 

“Identifying

 

parts

 

on

 

the

 

system

 

board”

 

on

 

page

 

87.

 

5.

   

If

 

necessary,

 

remove

 

any

 

adapters

 

that

 

impede

 

access

 

to

 

the

 

battery.

 

See

 

“Replacing

 

a

 

PCI

 

adapter”

 

on

 

page

 

91

 

for

 

more

 

information.

 

6.

   

Remove

 

the

 

old

 

battery.

 

  

  

7.

   

Install

 

the

 

new

 

battery.

 

  

  

8.

   

Replace

 

any

 

adapters

 

that

 

were

 

removed

 

to

 

gain

 

access

 

to

 

the

 

battery.

 

See

 

“Replacing

 

a

 

PCI

 

adapter”

 

on

 

page

 

91

 

for

 

instructions

 

for

 

replacing

 

adapters.

 

Note:

  

When

 

the

 

computer

 

is

 

turned

 

on

 

for

 

the

 

first

 

time

 

after

 

battery

 

replacement,

 

an

 

error

 

message

 

might

 

be

 

displayed.

 

This

 

is

 

normal

 

after

 

replacing

 

the

 

battery.

 

9.

   

Go

 

to

 

“Completing

 

the

 

FRU

 

replacement”

 

on

 

page

 

112.

 

 

92

 

Lenovo

 

3000

 

J

 

Series

Summary of Contents for 7387



























































































































































































































Reviews:

No comments

Related manuals for 7387

Festo MPS PA Compact Manual preview
MPS PA Compact
Brand: Festo Pages: 72
Digital Equipment FR-856E*-WB Service Maintenance Manual preview
FR-856E*-WB
Brand: Digital Equipment Pages: 74
IBASE Technology CSB200-818 User Manual preview
CSB200-818
Brand: IBASE Technology Pages: 68
Amico Hummingbird Lite Installation Instructions Manual preview
Hummingbird Lite
Brand: Amico Pages: 24
Arista ARP-3800AP-E01 Series User Manual preview
ARP-3800AP-E01 Series
Brand: Arista Pages: 54
Korg iS50 Installation Manual preview
iS50
Brand: Korg Pages: 5
HP b2600 Supplementary Manual preview
b2600
Brand: HP Pages: 108
HP Bc1500 - BladeSystem - Blade PC Setup And Installation Manual preview
Bc1500 - BladeSystem - Blade PC
Brand: HP Pages: 149
HP Compaq 18 All-in-One Product End-Of-Life Disassembly Instructions preview
Compaq 18 All-in-One
Brand: HP Pages: 13
HP Compaq d538 CMT Hardware Reference Manual preview
Compaq d538 CMT
Brand: HP Pages: 80
HP Compaq 303B Product End-Of-Life Disassembly Instructions preview
Compaq 303B
Brand: HP Pages: 7
HP Compaq dc7800 MT Technical Reference Manual preview
Compaq dc7800 MT
Brand: HP Pages: 102
HP Compaq dx7510 Service & Reference Manual preview
Compaq dx7510
Brand: HP Pages: 105
HP bc1000 Series Reference Manual preview
bc1000 Series
Brand: HP Pages: 22
HP Compaq dc7800 Series Reference Manual preview
Compaq dc7800 Series
Brand: HP Pages: 276
HP Compaq dc7700 Ultra Slim Desktop (USDT) Business Product End-Of-Life Disassembly Instructions preview
Compaq dc7700 Ultra Slim Desktop (USDT) Business
Brand: HP Pages: 10
HP compaq d538 Series Illustrated Parts List preview
compaq d538 Series
Brand: HP Pages: 2
HP Compaq 8200 Elite Series Specifications preview
Compaq 8200 Elite Series
Brand: HP Pages: 65

Brands by name

Popular brands

Load more brands