Lenovo 6241 Installation And Service Manual Download

Page: 205 / 1990

Server startup problems

Use this information to solve problems with booting your server after POST.

Table 51. Symptoms and user actions for server startup problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 5 “

Parts listing, System x3850 X6 and x3950 X6 Type 6241

” on page 201 to determine which

components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

• If an action step is preceded by

(Trained service technician)

, that step must be performed only by a Trained

service technician.

Symptom

Action

Server hangs during boot.

Look for the UEFI/Post code on the server LCD display panel and contact Support
and provide this number for further assistance.

The embedded hypervisor
flash device is not in the boot
list.

1. If the server has recently been installed, moved, or serviced, or if this is the first

time the embedded hypervisor is being used, make sure that the device is
connected properly and that there is no physical damage to the connectors (see
“Removing a USB embedded hypervisor flash device” on page 252 and
“Replacing a USB embedded hypervisor flash device” on page 254).

2. Check the Lenovo ServerProven web site at

http://www.lenovo.com/

serverproven/

to validate that the server supports the embedded hypervisor

device.

3. Use the Setup utility to make sure that the embedded hypervisor device (USB

key) is in the startup sequence. From the Setup utility, select

Start Options

4. See the documentation that comes with the optional embedded hypervisor flash

device for setup and configuration information.

5. Check Lenovo Support web site at

http://datacentersupport.lenovo.com/

for any

service bulletins related to the embedded hypervisor and the server.

6. Make sure that all other server software is running without problems to ensure

that the server is working properly.

Chapter 4

Troubleshooting

191

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands