Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD�
To use the controls:
1� Press to open the main OSD menu�
2� Use or to move among the icons� Select an icon and press to access the selected
function� If there is a sub-menu, you can move between options using or , then press to
select that function� Use or to make adjustments then press to save�
3� Press
to move backwards through the sub-menus and exit from the OSD�
4� Press and hold for 10 seconds to lock the OSD� This will prevent accidental adjustments to
the OSD� Press and hold for 10 seconds to unlock the OSD and allow adjustments to the
OSD�
5� Enables DDC/CI by default� Use OSD Exit Key, Press and hold
for 10 seconds to disable
/ enable DDC/CI function� A message "DDC/CI disable" is shown on the screen�
Adjusts overall screen Brightness/Contrast/DCR
Exit
Adjusts overall screen Brightness/Contrast/DCR
OK
Notes:Using the Low Blue Light
1� Press to open the main OSD menu
2�Use or to move among the icons� Select
and press to access
Image Properties�
3�
Use or to move among the icons� Select
Low Blue Light ,
then press to select that function�
4�
Use or to move among the icons� Select Off,then press to function disable�
