Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note:
The direct access controls are gray.
Table 2-1. Direct access controls
Icon
Control
Description
Input Change
Switches the video input source.
Image Setup
Activates automatic image adjustment.
Brightness
Direct access to Brightness adjustment.
Main menu
Open main OSD menu
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
to move among the icons. Select an icon and press
to access that
function. If there is a sub-menu, you can move between options using
or
, then
press
to select that function. Use
or
to make adjustments. Press
to
save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental adjustments
to the OSD. Press and hold
for 10 seconds to unlock the OSD and allow adjustments to
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold the
buttons for
10
seconds to
disable/enable DDC/CI function. The words " DDC/CI Disable/DDC/CI/Enable" shows on the
screen.
2-3 ThinkVision Pro2820 Flat Panel Monitor User’s Guide
