Lenovo 3200 Series, Installation Manual

Page: 95 / 132

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page
77
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (
qaucli
), a unified command line utility, to manage all QLogic adapter
models, including running user diagnostics. The overall option (
-pr < protocol >
) allows you to start the
utility with a specific protocol type: NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all
protocols are enabled by default. Table 11 and Table 12 list the QConvergeConsole commands for
selecting a protocol.
Diagnostic help commands, and command options available for each specific protocol, are available by
specifying -h to the protocol, as shown in Table 13.
Table 11. Windows QConvergeConsole CLI—Selecting a Protocol in Menu Mode
Command Description
qaucli
Start QConvergeConsole CLI in interactive mode
qaucli -pr nic [options]
Issue NIC command line options
qaucli -pr iscsi [options]
Issue iSCSI command line options
qaucli -pr fc [options]
Issue Fibre Channel and FCoE command line
options
qaucli -npar [options]
Issue NPAR command line options
Table 12. Windows QConvergeConsole CLI—Selecting a Protocol in Legacy Mode
Command Description
qaucli -nic [options]
Use NIC legacy command line
netscli [options]
Use NIC legacy command line
qaucli iscsi [options]
Use iSCSI legacy command line
iscli [options]
Use iSCSI legacy command line
qaucli -fc [options]
Use Fibre Channel legacy command line
scli [options]
Use Fibre Channel legacy command line
Table 13. Windows QConvergeConsole CLI—Getting Help
Command Description
-h
Print usage of a specific adapter type, and then exit
qaucli -pr nic -h
Print NIC protocol usage, and then exit
qaucli -pr fc -h
Print Fibre Channel and FCoE protocol usage, and then exit
qaucli -pr iscsi -h
Print iSCSI protocol usage, and then exit
qaucli -npar -h
Print NPAR commands usage, and then exit