Lenovo 30BX User Manual Download Page 49

Page: 49 / 150

Chapter 5. Advanced configuration

This chapter provides information to help you further configure the computer.

Using the Setup Utility program

The Setup Utility program is used to view and change the configuration settings of your computer. This
section provides information about only the major configuration settings available in the program.

Note:

The operating system settings might override any similar settings in the Setup Utility program.

Starting the Setup Utility program

To start the Setup Utility program, do the following:

1. Turn on or restart your computer.

2. Before the operating system starts up, repeatedly press and release F1 or Fn+F1 (depending on the

keyboard settings). Based on the Setup Utility display mode setting, one of the following situations
occurs:

• Text mode: The Setup Utility program opens.

• Graphic mode (available on some models): The start screen is displayed. Then, select

Setup

and

press Enter to open the Setup Utility program.

Note:

If a BIOS password has been set, the Setup Utility program will not open until you enter the

correct password. For more information, see “Using BIOS passwords” on page 37.

To view and change the configuration settings, follow the instructions on the screen.

Changing the display mode of the Setup Utility program

You can use the Setup Utility program in the graphic mode or the text mode according to your needs.

• Text mode: The keys on the keyboard used to perform various tasks are displayed at the bottom of the

screen.

Note:

The Serial Port Console Redirection item is available only in the text mode.

• Graphic mode (available on some models): In addition to the keyboard, you also can use the mouse to

make selections.

To change the display mode of the Setup Utility program, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 35.

2. From the main interface, select

Setup mode select

and press Enter.

3. Select

Graphic

Text

and press Enter.

4. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard

settings), select

Yes

in the window displayed, and press Enter.

Changing the display language of the Setup Utility program

The Setup Utility program supports three display languages: English, French, and simplified Chinese.

To change the display language of the Setup Utility program, do the following:

Summary of Contents for 30BX























































































































































Search results

Summary of Contents for 30BX

Reviews:

Related manuals for 30BX

Brands by name

Popular brands

Lenovo 30BX, User Manual

Search results

Summary of Contents for 30BX

Reviews:

Related manuals for 30BX

Brands by name

Popular brands