Installing the monitor driver in Windows 2000
Note: This section must be completed before continuing with the Windows 2000automatic
image setup.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into Windows 2000.
4. Open the
Display Propertie
s window by clicking
Start
Settings
Control Panel
, select/
enter into the
Display
control panel.
5. Click the
Setting
s tab.
6. Click the
Advanced
button.
7. Click the
Monitor
tab.
8. Click the
Properties
button.
9. Click the
Drivers
tab.
10. Open the
Upgrade Device Driver Wizard
window by clicking on
Update Driver
, and then
click Next.
11. Select “
Display a list of the known drivers for this device so that I can choose a specific
driver
” option, and then click
Next
.
12. Click the
Have Disk
button. Click on the
Browse
button and navigate to the following
directory:
X:\Monitor Drivers\Windows XP & Windows 2000
(where
X
is the drive letter designator for the CD-ROM drive).
13. Select the "
LT2323zwC.inf
" file and click the
Open
button. Click on the
Ok
button.
14. Select Lenovo
LT2323zwC
and click
Next
. The files will be copied from the CD to your
hard disk drive.
15. Close all open windows and remove the CD.
16. Restart the system.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60Hz, or 640 x 480 at a
refresh rate of 60 Hz.
3-8 LT2323zwC Flat Panel Monitor User’s Guide