Chapter 5. Using the Setup Utility
19
press Enter.
3. The password dialog box will be displayed. Type the new password, and
press Enter.
4. when prompted to confirm the password, type the password again. If
you type the password correctly, the password will be installed.
To delete a previously set user password, do the following :
Note:
When prompted for a password, you must type your supervisor
password.
1. From the Setup Utility program menu, select
Change User Password
and press
Enter
.
2. when you type the user password. a message will display that
Enter
New Password
. Press Enter and a message will display that indicates the
password has been disabled.
3. Press any key to contine.
Using Device
Device is used to enable or disable user access to the following device:
PS/2 Mouse Support
When this feature is set to
Disable
, the device
of PS/2 Mouse Support is disabled and will
not be displayed in the system configuration.
To set Device, do the following:
1. Start the Setup Utility program (see “Starting the Setup Utility program”
on page 16).
2. From the Setup Utility program menu, select
Device
.
3. Select
Onboard PS/2 Mouse Support
.
4. Select
Disable
or
Enable
and press Enter.
5. Return to the Setup Utility program menu and select
Exit
and then
Save
changes and Exit
.
Note:
If you do not want to save the settings, select
Discard Changes
and Exit
or
Discard Changes
. You can set others such as
Floppy
Drive Setup, Serial Port Setup, Parallet Port Setup, USB Setup,
Video Setup, Audio Setup, Network Setup
and so on. See the
information displayed on the right side of the screen.
