Lenovo 20WE006QGE-CAMPUS, Hardware Maintenance Manual

Page: 51 / 64

“Remove the fan” on page 33
“Remove the memory module” on page 34
“Remove the I/O bracket (left)” on page 35
“Remove the I/O board bracket (right)” on page 36
“Remove the CMOS battery” on page 37
“Remove the Lenovo Smart Pen holder” on page 38
“Remove the I/O board with cable” on page 39
“Remove the speakers” on page 39
“Remove the Lenovo Smart Pen charger cable” on page 40
“Remove the fingerprint board” on page 41
“Remove the system board” on page 41
“Remove the LCD unit” on page 43
Go to
https://support.lenovo.com/partslookup
to look up the Lenovo part number of the following replacement
part:
Upper case (with keyboard and touchpad)
Disassemble the LCD unit
The LCD unit as a whole is not an FRU. Instead, it contains FRUs as its components. Before disassembling
the LCD unit, make sure it has been detached from the upper case.
Remove the strip cover
Make sure the following unit has been removed.
“Remove the LCD unit” on page 43
Step 1. Remove the strip cover.
Figure 32. Remove the strip cover
Go to
https://support.lenovo.com/partslookup
to look up the Lenovo part number of the following replacement
part:
strip cover
Remove the rubber hinges
Make sure the following FRUs (CRUs) have been removed.
“Remove the LCD unit” on page 43
Chapter 4
.
Removing a FRU or CRU
45