manualshive.com logo in svg

Lenovo 10142/F0A9, Maintenance Manual

Share
Download
Lenovo 10142/F0A9 Maintenance Manual Download Page 32

Replacing the keyboard and mouse

To replace the keyboard and mouse:

Step 1.

Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Note:

Your keyboard will be connected to a USB connector on one side or at the rear of the

computer.

Step 4.

Disconnect the defective keyboard cable from the computer and connect the new keyboard cable
to the same connector.

Note:

The mouse can be replaced using the same method.

Replacing the power adapter

To replace the power adapter:

Step 1.

Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Locate the connector for the power cord. Refer to “Rear view”.

26

Lenovo Flex 20 All-In-One PC Hardware Maintenance Manual

Summary of Contents for 10142/F0A9






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands