Page 37
XPG20 SERIES
SLEEVE
AMBIENT SENSOR
− EXTEND TIP OF
PLASTIC SENSOR JUST OUTSIDE OF
PLASTIC SLEEVE.
WIRE TIE
DEFROST COIL SENSOR
: 12 TUBES UP
FROM
BOTTOM
(11−1/2") OUTSIDE ROW
DISCHARGE LINE SENSOR
DETAIL A
DETAIL B
Place ambient sensor and wire from DCB inside of plastic
sleeve and route through gap between corner post and
coil support as shown. Secure with wire tie.
DETAIL C
Figure 24. Defrost Coil, Ambient, and Discharge Line Sensor Locations
