5
codes/regulations. The manufacturer assumes no responsibilities for equipment installed in
violation of any codes or regulations.
3.1.4 Replacement Parts
When reporting shortages or damages, or ordering repair parts, give the complete product
model and serial numbers as stamped on the product. Replacement parts for this product are
available through your contractor or local distributor.
3.2 Important Safety Instructions
Recognize Safety Symbols, Words, and Labels
The following symbols and labels are used throughout this manual to indicate immediate or
potential hazards. It is the owner‟s responsibility to read and comply with all safety information and
instructions accompanying these symbols. Failure to heed safety information increases the risk of
serious personal injury or death, property damage and/or product damage.
DANGER
: Immediate hazards which will result in property damage, product damage,
severe personal injury or death.
WARNING
: Hazards or unsafe pratices could result in property damage, product
damage, severe personal injury or death.
CAUTION
: Hazards or unsafe practices which may result in property damage, product
damage, severe personal injury or death.
WARNING
: Before serving or installing this equipment. The electrical power to this unit
must be in the “off” position. Caution, more than one disconnect may exist. Failure to observe this
warning may result in an electrical shock that can cause personal injury or death.
WARNING
: The United States environmental protection agency („epa”) has issued
various regulations regarding the introduction and disposal of refrigerants introduced into this unit.
Failure to follow these regulations may harm the enviroment and can lead to the imposition of
substantial fines. These regulations may vary due to the passage of laws. A certified technician
must perform the installation and service of this product. Should questions arise, contact your local
epa office.
WARNING
: Due to high system pressure and electrical shock in potential, installation
and service work can be dangerous. Only trained and qualified personnels are permitted to install
or service this equipment. Observe all warnings contained in this manual and labels/tags attached
to the equipment.
WARNING
: This product is factory shipped for use with a 208-230/1/60 electrical power
supply. This air handler must not be reconfigured to operate with any other power supply.
WARNING
: The unit must have an uninterrupted, unbroken electric grounding to
minimize the possibility of personal injury if an electric fault occurs. The electric grounding circuit
Lennox VRF Air Handler Indoor Unit
