4
Figure 2. Installation
2. Attach the back cover using fi eld-provided screws.
3. At the controller, wire the fi eld-provided 4-conductor shielded cable to X / Y / GND (E)
/ 12V terminal of the controller. See Figure 3.
1. Adjust the length of the two plastic spacers as needed to allow the controller to be
mounted fl ush with the wall.
NOTE
– Be sure to provide for future maintenance by
allowing enough slack in the wiring to allow the controller to be removed from the wall
if needed.
See Figure 2.
Figure 3. Connection at Controller
4-conductor wiring
