@DNOVA THS_R410A-IOM-1304-E
6
2
Inspection / Transport
2.1
Inspection on receipt
On receiving the unit, check that it is perfectly intact: the unit left the factory in perfect conditions; immediately report any
signs of damage to the carrier and note them on the Delivery Slip before signing it.
Lennox
or its Agent must be promptly
notified of the entity of the damage. The Customer must submit a written report describing every significant sign of
damage.
2.2
Lifting and transport
While the unit is being unloaded and positioned, utmost care must be taken to avoid abrupt or violent maneuvers. The
unit must be handled carefully and gently; avoid using machine components as anchorages or holds and always keep it
in an upright position.
The unit should be lifted using the pallet it is packed on; a trans pallet or similar conveyance means should be used.
Warning: In all lifting operations make sure that the unit is securely anchored in order to
prevent accidental falls or overturning.
2.3
Unpacking
The packing must be carefully removed to avoid the risk of damaging the unit. Different packing materials are used:
wood, cardboard, nylon etc.
It is recommended to keep them separately and deliver them to suitable waste disposal or recycling facilities in order to
minimize their environmental impact.
