background image

Page 3

Safety Instructions

1 -   

Keep the furnace area clear and free of combustible 

material,  gasoline,  and  other  flammable  vapors 

and liquids. If it is installed in an insulated area, the 

furnace  must  be  kept  free  of  insulating  material. 

Insulating material may be combustible.

2 -   

DO NOT 

obstruct air flow to unit. Unit must receive 

an unobstructed flow of combustion and ventilating 

air.  DO  NOT  block  or  obstruct  air  openings  on 

the furnace or air openings to the area in which 

the  furnace  is  installed.  Take  care  to  maintain 

established clearances surrounding the furnace.

3 -   

DO NOT

  store  chlorine  or  fluorine  products  near 

unit or introduce these products into the combustion 

air. These products can cause furnace corrosion.

4 -   

DO NOT draw return air from a room where this 

furnace, or any other gas appliance (ie., a water 

heater), is installed.

 When return air is drawn from 

a room, a negative pressure is created in the room. If 

a gas appliance is operating in a room with negative 

pressure, the flue products can be pulled back down 

the vent pipe and into the room. This reverse flow 

of the flue gas may result in incomplete combustion 

and  the  formation  of  carbon  monoxide  gas.  This 

toxic gas might then be distributed throughout the 

house by the furnace duct system.

 WARNING

The blower door must be securely in place when the 

blower and burners are operating. Gas fumes, which 

could contain carbon monoxide, can be drawn into 

the living space resulting in personal injury or death.

Your furnace is a gas appliance. 

It is critical that the gas 

supplied to the unit be completely burned to avoid the pro

-

duction of carbon monoxide gas. Complete combustion of 

the gas requires, but is not limited to, correct gas pressure 

and  gas  flow  rate,  adequate  combustion  air  and  proper 

venting

 WARNING

Asphyxiation Hazard

The exhaust vent for this furnace must be leak-free 

and must be securely connected to the furnace flue 

collar at all times.

For your safety and to fulfill the terms of the limited 

warranty, a licensed professional service technician 

(or equivalent) must annually inspect this furnace 

and its vent system.

Exposure to carbon monoxide gas can cause personal in

-

jury and even death to all occupants, including pets. Any 

item that is powered by, or gives off heat from, a combus

-

tion  process  (including  lawn  mowers,  automobiles,  and 

fireplaces) has the potential to produce carbon monoxide 

gas. Because of this, 

Lennox recommends the use of 

a carbon monoxide detector in your home, even if 

you do not own gas appliances. 

Reliable detectors are 

available at reasonable retail prices. Contact your Lennox 

dealer for more details about this investment in your safe

-

ty.

Your furnace is designed to meet standards set by nation

-

al agencies, and to operate safely when properly installed 

and maintained. However, the unit’s performance can be 

greatly impacted by the individual installation and the op

-

erating environment. It is your responsibility to ensure that 

this appliance is maintained.
Proper maintenance is critical for your safety and the sat

-

isfactory operation of the product.

 Lennox strongly rec-

ommends annual inspection and maintenance of this 

appliance.

 Contact your Lennox dealer for an inspection 

by a licensed professional service technician

.

 DANGER

Danger of explosion.

There are circumstances in which odorant used 

with LP/propane gas can lose its scent. In case of 

a leak, LP/propane gas will settle close to the floor 

and  may  be  difficult  to  smell. An  LP/propane  leak 

detector should be installed in all LP applications.

Do not attempt to bleed the gas lines of air. Call your

local gas provider.

Summary of Contents for ML180UHE








Reviews: