background image

11

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

LENNOX MERIT

®

 SERIES B-VENT GAS FIREPLACES   •   36" LMBV MODELS   •   CARE AND OPERATION INSTRUCTIONS

lIGHTING INSTRUCTIONS – HONEyWEll AND SIT mIllIvOlT GAS vAlvE

FOR yOUR SAFETy READ bEFORE lIGHTING

A.

  This appliance has a pilot which must  be lighted with a piezo 

ignitor. When lighting the pilot, follow these instructions 

exactly.

b.  bEFORE OPERATING

 smell all around the appliance area for 

gas. Be sure to smell next to the floor because some gas is 

heavier than air and will settle on the floor.

 

WHAT TO DO IF yOU SmEll GAS

  Extinguish any open flame.

  Open windows.

  Do not light any appliance.

  Do not touch any electrical switches.

TO TURN OFF GAS TO APPlIANCE

1.

  Turn remote wall switch “OFF.” The pilot will remain lit for  

normal service.

2.

  For complete shutdown, turn remote wall switch to “OFF.”

3.

  Access the lower control compartment.

4. 

Depress gas control knob slightly and turn clockwise

                to “OFF.” Do not force.

5. 

Close lower control compartment.

lIGHTING INSTRUCTIONS

1.  STOP! 

Read the safety information above on this page.

2.

  Access the lower control compartment.

3.

  Turn remote wall switch to “OFF.”

4.

  Verify main line shut-off valve is open.

5.

  Push in gas control knob slightly and turn clockwise 

                 

 

      to “OFF.”

 

7.

  Push in gas control knob slightly and turn counterclockwise 

                  to “PILOT.”

 

8.

  Push in control knob all the way and hold in. Immediately light the 

pilot by triggering the spark ignitor (pushing the button) until pilot 

lights. Continue to hold the control knob in for about  1 

¹⁄₂

 minutes 

after the pilot is lit. Release knob and it will pop back up. Pilot 

should remain lit. If it goes out, repeat steps 5 through 8.

  If knob does not pop up when released, 

stop and immediately call your service 

technician or gas supplier.

  If pilot will not stay lit after several tries, 

turn the control knob to “OFF” and  call 

your service technician or gas supplier.

 

9.

  Turn gas control knob counterclockwise                  

to “ON.”

 10.

  Close lower control compartment.

  Do not use any phone in your building.

  Immediately  call  your  gas  supplier  from  a  neighbor’s 

phone.

  If your gas supplier cannot be reached, call the fire depart-

ment.

C.

  Use only your hand to push in or turn the gas control knob. 

Never use tools. If the knob will not push in or turn by hand, 

do not try to repair it, call a qualified service technician. Force 

or attempted repair may result in a fire or an explosion.

D.

 Do not use this appliance if any part has been under water. 

Immediately call a qualified service technician to inspect the 

appliance and to replace any part of the control system and 

any gas control which has been under water.

Note: Knob cannot be turned from “PILOT” to “OFF” 

  unless the knob is pushed in slightly. Do not force.

6. 

  Wait five (5) minutes to clear out any gas. If you 

then smell gas, STOP! Follow “B” in the safety 

information above on this page. If you do not smell 

gas, go to the next step.

SIT 

mIllIvOlT 

GAS vAlvE

HI

L O W

TPTH

TP

TH

PILO

T

P

IL

O

T

ON

i

t

OFF

OUT

IN

SIT

MILLIVOLT PILOT

WARNING: IF yOU DO NOT FOllOW THESE INSTRUCTIONS ExACTly, A FIRE OR ExPlOSION 

mAy RESUlT CAUSING PROPERTy DAmAGE, PERSONAl INjURy OR lOSS OF lIFE.

Summary of Contents for Merit LMBV-36REN





















Reviews: