background image

3

Unpacking required.

Remove  all  protective  packing  material  from  the 
pleated filter and the titanium dioxide insert.
All  packing  material  should  be  discarded  properly 
in refuse containers.

NOTICE

UNPACKING THE PCO-20P 

(Fig. 1)

Before installation, the PCO-20P assembly must 
be removed from its mounting rack. 
1. Remove the metal air seal strip.
2. Slide the PCO assembly out of the rack.

Fig. 1

 Remove the metal air seal strip and slide the PCO 

assembly out of the rack.

2

Dimensions/Specifications

DIMENSIONS:

Model PCO-20P:

    

21

 

1

/

2

"

 L x 9

 

3

/

4

W x 28 

1

/

2

H

    

                                       

(546mm x 248mm x 724mm)

Shipping Box:

        

28

 

1

/

2

"

 L x 20

W x 41

H

      

                                       

(724mm x 508mm x 1041mm)

WEIGHT:

Model PCO-20P:      79 

3

/

4

 lbs.(36 kg.) Installed

                                 83 lbs.(37 

3

/

4

 kg.) Shipping

ELECTRICAL

:

Transformer(Rated):  Primary 208V/230V, 1.2 Amps,  
                                 60 Hz. Secondary 115V. 
Model PCO-20P:      120V, 1.2 Amps, 60Hz 

POWER CONSUMPTION:

Model PCO-20P:      144 Watts

OPERATING ENVIRONMENT:

41°F - 140°F (5°C - 60°C) Outside of duct.
10%-60% relative humidity. (PCO has optimal per-
formance at 50% relative humidity.)

PLEATED FILTER EFFICIENCY:

Minimum Efficiency Rating Value - MERV 16. 
Tested to ASHRAE Standard 52.2.

LISTINGS:

ETL Safety Listing Report #3082884CHI-001, 
Conforms to UL STD 1598, Certified to CSA STD 
C22.2 NO.250.0

This device complies with FCC – CFR47 Part 18 
Consumer (Class B).

Specifications subject to change without notice.

3

/

4

"

21 

1

/

2

"

28 

1

/

2

"

Top View

Side View

Unpacking

UNPACKING THE FILTERS 

(Fig. 2)

The MERV 16 pleated filter has been packaged in 
a plastic bag with an instruction sheet. The insert 
has been vacuum packaged. 

All protective wrap-

ping MUST BE removed prior to installation and 
operation of system.

Fig. 2

 Remove and discard all wrapping and packaging 

material prior to installation and operation of PCO-20P.

PCO Assembly

Metal Air Seal Strip

Metal Rack

Summary of Contents for Healthy Climate PureAir PCO-20P-2










Reviews: