6
This function increases (in cooling mode) or decreases (in heating mode) the operating set point according to the lower level of
comfort required during the night.
Not possible with time bands program.
ACTIVATION
Press “ ” button once. The display shows “ ” symbol with “
HR
” flashing.
In this way, sleep function will work for 1 hour.
If you want it to work for longer, press “ ” button repeatedly while “1
HR
” is still flashing (each press of the button increases by
hour, till max 9 hours).
Finally, the display shows the “ ” symbol with the number of hours you choose.
DEACTIVATION
Press the “ ” button once and the sleep function will be deactivated (if it was activated before). The “ ” symbol disappears from the display.
DIFFERENTIAL SETTINGS
Press “ ” button for 3 seconds. The sleep differential (the value by which you increase or decrease the comfort set point)
appears on the display.
Use the “ ” buttons to set the value, then press the “ ” button to accept.
Note that cooling and heating modes have different sleep differential values, so you can modify only the current operating mode’s value.
To set current time:
1. Press the “ ” button for 6 seconds. “rtc” and current time appears on the display (hours are flashing).
2. Set the hour using the “ ” buttons.
3. Press the “ ” button to accept. Minutes start flashing on the display.
4. Set the minutes using the “ ” buttons.
5. Press the “ ” button to accept. “day” and the number of the day of the week appear on the display (Monday=1, Tuesday=2 etc.)
6. Set the day by using the “ ” buttons.
7. Press the “ ” button to accept.
3.1.- TURN ON/OFF THE UNIT WITH REMOTE CONTROL DC40 (AIRCOOLAIR)
3.2.- SELECTING THE UNIT´S OPERATING MODE
Once the unit is turned on, you can select Cooling, Heating or Automatic mode just pressing the “
Mode
” button. In the automatic
mode you just choose the set point and the system automatically switches from cooling to heating mode, depending on the position
of the ambient temperature with respect to the set point.
3.3.- SELECTING DESIRED ROOM TEMPERATURE
If unit is working, the “ ” buttons allow the desired room temperature to be select (set-point).
The “↑” button allows the current set point to be increased by 0.5ºC.
The “↓” button allows the current set point to be decreased by 0.5ºC.
3.4.- SELECTING THE FAN OPERATING MODE (Aircoolair)
In order to be able to select a fan operating mode, the unit’s operating mode (cooling, heating or auto) must be selected.
Pressing the side button “
” scrolls through the following modes: FAN CONSTANTLY ON, or AUTO
FAN CONSTANTLY ON: Fan is ON continuously and the “ ” simbol will appear.
AUTO: Fan on and off together with the compressor or with the freecooling, the “ ” symbol will appear.
3.5.- SLEEP FUNCTION
3.6.- CLOCK SETTINGS
To
turn on
the unit press the “ ” button.
The display shows current operating mode.
DESCRIPTION OF CONTROLS
3.7.- TIME BANDS PROGRAM
This function allows you to programme time bands during the week, each one with a different set point. In this way you can adapt
the cooling/heating provided by the unit according to each moment of the day.
You can set two time bands for the weekdays and another two for the weekend.