Lennox 22U50 User Manual Download Page 2

2

Requirements

Using the remote controller 

•  Point the remote controller directly at 

the indoor unit.

•  Stand within 25 feet of the indoor unit.
•  Do not block the signal between the 

remote controller and indoor unit. 

NOTE: 

The remote controller will not 

function without a clear line of 

sight to the indoor unit.

•  Do not submerge the remote control-

ler in liquid.

•  Do not expose to direct sunlight.
•  Do not drop or step on remote con-

troller. 

•  Ensure that the remote controller is 

pointed directly at the indoor unit. If 

the remote controller is pointed direct-

ly toward the ceiling, it will not control 

the indoor unit (except cassette units 

if installed directly above the holder).

Specifications

Table 1. 

Specifications

Rated voltage

3.0 VDC - (2 

AAA batteries 

included)

Min voltage for sending 

signal to CPU

2.4 VDC

Effective transmitting 

distance

26 feet (8 

meters)

Operation conditions

23°F to 140°F  

(-5 to 60°C)

Overview

Furnished with Wall-Mount, Cassette, 

Floor Console and Ceiling/Floor Indoor 

Units.

•  Complete remote control of system
•  Wireless remote controller holder fur-

nished

•  Holder can be mounted on a wall for 

easy access

•  Mounting screws furnished

Summary of Contents for 22U50









Reviews: