Lennox Hearth Products LBLK-100 Installation Instructions Download Page 2

Page: 2 / 4

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Step 9B. Next, rest the blower on the cabinet bottom (

see Figure 5 ).

Figure 5

LBLK-100 Blower Resting On Cabinet Bottom

Blower Access Cutout

Step 9C. Now gently slide the blower assembly towards the back of the
fireplace (

see Figure 6 ).

Step 9D. Rotate the blower assembly so the base rests on the cabinet
bottom (

see Figure 7 ).

Figure 6

Cabinet Bottom

Figure 7

Cabinet Bottom

Blower Assembly Base

Step 9E. Place the blower assembly in its final position at the back of the
cabinet bottom, resting on the blower mounting tabs (

see Figure 8 ).

Bend the mounting tabs over the blower base to secure.

Figure 8

Blower Mounting Tab

Blower Assembly

Figure 4

Blower Access Cutout

Left Side Of Blower Assembly Tilted Into Access Cutout

Step 9. - Installing The LBLK-100 Blower
9A. First, tilt the left side of the blower into the cutout (

see Figure 4 ).

Blower Base

Summary of Contents for LBLK-100

Page 1: ...1 Turn off the fireplace and allow it to cool before proceeding Step 2 If the appliance is connected to 120 volt power disconnect the power Step 3 Shut off the gas supply to the fireplace Step 4 Remo...

Page 2: ...et bottom see Figure 7 Figure 6 Cabinet Bottom Figure 7 Cabinet Bottom Blower Assembly Base Step 9E Place the blower assembly in its final position at the back of the cabinet bottom resting on the blo...

Page 3: ...Check the start up and shutdown and the running operation of the blower Figure 9 Figure 10 JUNCTION BOX W GR BK 120 VAC BK R TRANSFORMER 3V INTERMITTENT ELECTRONIC WIRING DIAGRAM BROWN BROWN BLACK BA...

Page 4: ...50 216M REV N C 03 2006 The manufacturer reserves the right to make changes at any time without notice in design materials specifications prices and also to discontinue colors styles and products Cons...