background image

Printed in U.S.A. © 2007 by Lennox Hearth Products

P/N  5,210M  REV. C  02/2010

Lennox Hearth Products reserves the right to make changes at any time, without notice, in 

design, materials, specifications, prices and also to discontinue colors, styles and products. 

Consult your local distributor for fireplace code information.

WARRANTY

Your wood appliance is covered by a limited warranty (provided with the 

appliance).  Please read the warranty to be familiar with its coverage.

Retain this manual. File it with your other documents for future refer-

ence.

REPLACEMENT PARTS

See Pages 18 and 19  for a complete replacement parts list.  Use only 

parts supplied from the manufacturer.

Normally, all parts should be ordered through your Lennox distributor or 

dealer. Parts will be shipped at prevailing prices at time of order.

When ordering repair parts, always give the following information:

1.

 The model number of the appliance.

2.

 The serial number of the appliance.

Your Appliance’s Model Number _______________________________________

Your Appliance’s Serial Number ________________________________________

The Date On Which Your Appliance Was Installed __________________________

Your Dealer's Name _________________________________________________

 

.

 The part number.

.

 The description of the part.

5.

 The quantity required.

.

 The installation date of the appliance.

If you encounter any problems or have any questions concerning the 

installation or application of this system, please contact your dealer.

LENNOX HEARTH PRODUCTS

1508 Elm Hill Pike, Suite 108

Nashville, TN 210

visit us at www.Lennox.com

1-800-9-LENNOX

PRODUCT REFERENCE INFORMATION

We recommend that you record the following important information about 

your appliance.  If you did not purchase your appliance directly from a 

Lennox Hearth Products dealer, then please call 1-800-9-LENNOX for the 

name and phone number of your nearest Lennox Hearth Products dealer 

who will answer your questions or address your concerns. 

1508 Elm Hill Pike, Suite 108 • Nashville, TN 210

Summary of Contents for Elite E260



























Reviews: