Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led
Led blinks to indicate a working circuit connection
Reset
Press reset button to restart the device
Power input
Connect with AC100~240V power line
HDMI
output
IR blaster extension
cable interface
Connect with IR blaster extension cable. Please put the IR blaster
close to source device to best transmit the IR signal from receiver
2
. HDMI
E
xtender RX receiver
Specification
HDMI signal
Full compatible with HDCP
Support resolution
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
Transmit distance
It extends 1080P@60Hz signal up to 300 meters in good
electric power environment.
Working temperature
0℃
～
60℃
Input voltage
AC 100～240V
Power consumption
TX: 7.5W; RX: 7W
Product dimension
Weight
Color
Items
Black
Enclosure material
fireproof engineering plastics
Transport protocol
HDbitT
•
Connection
•
FAQ
Q:
TV display “waiting for connection…” on the bottom right corner?
A:
Please check if the power supply of TX (sender) is well connected and the
power indicator led lights on.
Q:
TV display “Please check the TX input signal”?
A:
1) please check if there is an HDMI signal input of sender TX.
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
•
Specification
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led
Led blinks to indicate a working circuit connection
Reset
Press reset button to restart the device
Power input
Connect with AC100~240V power line
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make sure the
remote control is within the required range of IR receiver.
HDMI output
Connect with HDMI display device
1
. HDMI Extender TX sender
Q:
Display not fluent and stable?
A:
1)
Please check if the powerline is arranged smooth and If the poweline
length is over the limitation of this product.
2)
Please check if the powerline capacity is over loaded
3)
Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using power charger and
power adapter
.
IR remote control
Support 20~60kHz IR remote device
150(W) x 92.7(D) x 25(H) mm
*2pcs
TX: 330g RX: 316g
TV
DVD
TV
Sender
Receiver
IR
OUT
IR
IN
Powerline
HDMI
cable
WARNING
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WARNING
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input
Connect with HDMI source device
Connect with HDMI
display
device
Note: The transmission distance may vary in different
electric power environment.
