Lenel LNL-3300-M5, Installation Manual

Page: 98 / 184

LNL-1320-2RP Dual Door Control Module
98 —
revision 7
31.2.1 Unsupervised Inputs wired to the LNL-1320-2RP
Unsupervised inputs for the door position monitor and REX switches are wired to TB1 for the first reader,
and TB3 for the second reader. End-of-Line (EOL) resistors are not required.
Unsupervised Input Wiring on LNL-1320-2RP
31.2.2 Unsupervised Inputs wired to the F/2F Reader
Unsupervised inputs for the door position monitor and REX switches are wired directly to the F/2F reader
configured for 2-State Supervision. See the reader’s documentation for the proper connection terminals.
End-Of-Line (EOL) resistors are not required.
Unsupervised Input Wiring on LNL-1320-2RP Callouts
Callout Description
1 TB1 or TB3 on LNL-1320-2RP
2 Normally Open contact for Request-to-Exit (REX) switch
3 Normally Closed contact for door monitor switch
1
2
3
GND
DISP
REX+
WD1
WD0
LED
CLK DO
DC+
Not Used
VO
10
1
TB
1
or
TB
3
2
5
8