Installing batteries (not included)
1.
Position the radio face down.
2.
Press the catch and slide in the direction of the arrow.
3.
Lift up the battery compartment
4.
Insert 3xUM-3 (AA) size batteries. Make sure the batteries are positioned in accordance with the
diagram
indicated.
5.
Replace the battery compartment
AC adaptor (not included)
The AC adaptor for use with this radio should provide 4.5volts DC output at 200 mA center pin (-)negative. Insert the
adaptor plug into the jack on the side of the radio marked "DC 4.5v". Plug the other end of the adaptor into a standard
household outlet. Whenever the adaptor is used, the batteries are automatically disconnected The AC adaptor should
be disconnected from the mains supply and the radio when not in use.
Note: The power adaptor supplies power only to the radio. The clock operates on batteries.
Phones Jack (not included):
Stereo Headphone Jack is enable you listening to stereo FM, which is inserted into the HEADPHONE jack located on
the left side of the radio, marked with the "PHONES" symbol. When the PHONES Jack is plugged in, the loudspeaker
will mute.
Setting the clock time.
Note:Time can only be set with the radio turned off.
1.
Ensure that the radio is turned off.
2.
Press the [TIME SET] button, the digit hours and minutes with blink will be displayed on the LCD for
5 seconds.
3.
While the time display is blinking, press and hold down the [DOWN/UP] button or intermittently until
the desired time is reached.
4.
Press the Alarm button to complete alarm time setting. The "ALARM" symbol will appear on the
display indicating the alarm is set,
5.
Press the [TIME SET] button again or wait for about 5 seconds to complete time setting.
Summary of Contents for WR-34 PLL
Page 2: ......
