background image

16

17

EN -

- EN

LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL  

LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL 

The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.

When contacting Lenco, you will always be asked for the model and serial number of your 

product. The serial number can be found on the back of the device. Please write down the 

serial number below:
Model: Playlink-4

Serial number: ________________________________
Lenco offers service and warranty in accordance to European law, which means that in 

case of repairs (both during and after the warranty period) you should contact your local 

dealer. 
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any 

way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty 

obligations of the manufacturer will be voided.

® 

All rights reserved

www.lenco.com
Explanation of symbols:

   

This symbol indicates that there are important operating maintenance  

   

instructions in the user manual accompanying the device.

   

This symbol indicates that dangerous voltage is present within this device,  

 

   

constituting a risk of electronic shock or personal injury.

   

CAREFULLY READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN THIS DEVICE

 
   

WARNING: DO NOT REMOVE ANY SCREWS OR OTHER COMPONENTS OF  

   

THE DEVICE TO PREVENT THE RISK OF ELECTRIC SHOCK.

This symbol indicates that the relevant electrical product or battery should not 

be disposed of as general household waste in Europe. To ensure the correct 

waste treatment of the product and battery, please dispose them in accordance 

to any applicable local laws of requirement for disposal of electrical equipment 

or batteries. In so doing, you will help to conserve natural resources and improve 

standards of environmental protection in treatment and disposal of electrical 

waste (Waste Electrical  and Electronic Equipment Directive).

Products with the CE marking comply with the EMC Directive (2004/108/EC) 

and the Low Voltage Directive (2006/95/EC) issued by the Commission of the 

European Community

•  Install and use the device only as described in the user manual.

•  This device must be used in combination with a power supply as specified in the  

  specification table. If you are not sure of the type of power supply used in your  

  home, consult your power company.

•  Do not use loose or damaged cords and/or plugs.

•  The power outlet must be located close the device and must be easily accessible.

•  Make sure that power outlets or extension cables are not over overloaded. Overloading  

  can cause short-circuits or fire.

•  Always pull the plug when removing it from the power outlet. 

•  Do not pull the power cord. This may cause a short-circuit.

•  If you notice smoke, an excessive build-up of heat or any other unexpected  

  phenomena, you should disconnect the plug from the power outlet immediately.

•  Disconnect the plug from the power outlet during lightning storms.

•  Disconnect the plug from the outlet when the device will not be used for a long time.

•  Do not step on the power cord and don’t pinch the power cord.

•  Do not place heavy objects on the power cord or any other cables as this may damage  

  the cord or cables.

•  Keep the device away from children! When they play with the power cord, they can  

  seriously injure themselves.

•  Keep the power cable away from rodents and rabbits.

•  Make sure all ventilation openings are clear at all times, do not cover or block them.

•  Leave 5 cm (2”) free space around the device.

•  Always make sure the device is well ventilated.

•  Keep the device away from heat sources such as radiators, heaters, stoves, candles  

  and other heat-generating products 

•  Avoid using the device near strong magnetic fields.

•  Do not use this device when condensation may occur.

•  Do not use this device near water or other liquids.

•  Do not use this device in a damp room.

•  Do not use this device near a swimming pool.

•  Electrostatic interference may interfere with the normal use of this device. If this occurs,  

  reset the device and restart it according to the instructions in the user manual. 

•  The display is made of plastic and might break when it’s damaged. Beware of sharp  

  plastic splinters when the screen breaks to avoid injury.

•  Should the unit become wet, immediately remove the plug from the power outlet and let  

  the appliance fry for 72 hours before trying to use it again.

•  Remove the batteries from the device and/or remote control if they will not be used for  

  a long time.

•  This device and the supplied accessories contain sensitive components. Never drop  

  them, put them in a microwave, burn them or paint them.

•  Do not bite or suck on the device and/or supplied accessories.

•  Do not insert the device or the supplied accessories in your ears, mouth or other body  

  orifices.

•  This device and/or accessories contain small parts that may lead to a choking hazard.   

  Therefore, keep it away from children.

•  When connecting the device, if a connector does not seem to fit, do not force it.

•  Be careful when using this device when participating in traffic, the sound might distract  

  your attention.   

Summary of Contents for PlayLink 4











Reviews: