EN - 23
TROUBLE SHOOTING
No power.
•
Ensure the AC adaptor is connected.
•
Make sure that the unit is turned on.
The remote control does not function.
•
Make sure the infrared remote sensor is not blocked.
•
Point the remote directly at the infrared remote sensor on the unit.
•
Replace the battery in the remote with a new one.
Very little or no sound is coming from a DVD.
•
Make sure that the unit is turned ON.
•
Make sure the unit is not paused. Press .
•
Make sure the unit is not in fast-forward or fast-reverse mode. Press .
•
Make sure that the connections are correct.
•
Make sure the MUTE function is not on.
The player does not start playback
•
Insert the disc with the printed side facing you.
•
Check that the disc can actually be played by this device.
•
Check that the disc’s regional code matches the player’s regional code. This player’s
regional code is 2.
•
Clean the disc.
The picture is not clear.
•
The DVD is dirty. Gently clean the disc.
•
The disc is scratched.
* If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error. Before
playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t
store discs in places with high temperatures or high humidity, they can become warped.
After playing, store the disc in its case.
Important Note
•
Before transporting the unit, remove the disc from the disc compartment.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.(Waste Electrical and Electronic Equipment Directive)
