8
OPERATION
-
INSTALL THE DUST COVER INTO HINGE ON THE UPPER CABINET.
-
SET THE TURNTABLE PLATTER ONTO THE CENTER SPINDLE.
-
ATTACH THE DRIVE BELT: POSITION THE BELT ON THE MOTOR PULLY, THE DRIVE BELT IS TIGHTENED
UNDER THE TURNTABLE PLATTER.
-
PLACE THE SLIP MAT ON THE TURNTABLE PLATTER.
-
INSERT THE
HEADSHLL
INTO THE FRONT END OF THE TONEARM, THEN SCREW THE LOCK NUT WITH
THE
HEADSHELL
FIRMLY HELD HORIZONTALLY.
INSTALL THE COUNTERWEIGHT
-
SLIDE
COUNTERWEIGHT
ONTO THE TONEARM. TWIST IT LIGHTLY AND IT WILL SCREW INWARDS
ONTO THE REAR END OF THE
TONEARM
. EVERY FULL TURN OF THE SCALE RING REPRESENTS
AROUND 2.4 GRAM (+/
-
0.4 GRAM).