LENCO LBT-188, User Manual, Page: 11 / 166

10
2. Pull the anti - skating weight slightly to let the tie of the fishing line move
to the stub.
3. Lift the anti - skating weight over the anti - skating weight wire support.
The anti - skating weight should now be dangling in free space to the left
of support.
Slip the loop of the anti - skating weight's thread over the 3nd groove of the
stub to set the correct anti - skating force for the factory - fitted cartridge. Feed
the thread through the loop of the wire support.
Anti - skating force adjustment
The anti - skating force must be adjusted corresponding to the down force as
follows:
Down force Groove in the stub
2 - 2.5g 1 st from bearing rings
2.5 - 3g 2 nd " " "