8
Playing a record
1)
Place the record on the turntable. If it is a 45 rpm, you need to place
the adaptor on the record spindle.
2)
Choose the playing speed, record
3)
Release the pick-up arm clip.
4)
Place the cartridge vertically over the first track of the record the
turntable.
5)
When it play to the end of the record, the platter is auto-stop, push the
lift button to lift the tone arm and lead it back to the arm rest.
6)
When the auto stop system is activated, the platter will stop in a few
seconds, if you want to repeat playing the same side of the vinyl, need
to release the auto-stop as following:
i) Move the tonearm to arm rest, and them put it on the track you to
play. Or,
ii) Switch the 33/STOP/45 knob to “STOP” , then switch to 33 or 45.
7)
If you want to pause the playing, switch the knob on the left side to
“STOP”, and switch it to 33 or 45 to continue the playing.
8)
After finish the playing, please switch off the power to save energy.
Record to PC
Connect USB to PC for editing the music with your favorite digital editing
software.
With this unit, we offer you a disc with a PC music editing program, please
refer to the instructions attached to this manual for the operation.
