background image

                                                                             

15 

 

 

Electrical Information 

This  Speaker  Dock  is  fitted  with  a  BS1363/A  13  amp  plug.  If  it  is  not  suitable  for  your  supply 

sockets it must be removed and replaced with an appropriate plug.  If the plug becomes damaged 

and/or needs to be replaced please follow the wiring instructions below.   

The plug removed must be disposed of immediately. It must not be plugged into a supply socket as 

this will be an electrical hazard. If the fuse needs to be replaced it must be of the same rating and 

ASTA approved to BS1362. If the plug is changed, a fuse of the appropriate rating must be fitted 

in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the fuse 

cover must be refitted before the appliance can be used. 

Wiring Instructions 

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions given 

below. In both cases ensure that the outer sheath of the cable is firmly held by the cable clamp. 

2-Core Plug 

WARNING!

 Do not connect either wire to the earth terminal. 

 

This  symbol  indicates  that  this  2-core  appliance  is  Class  II  and  does  not  require  an  earth 
connection. 

 

 

 

The iPod Speaker Dock is guaranteed for twelve months from the date of original purchase. If any 

defect due to faulty materials or workmanship, contact the Goodmans Helpline. Have your receipt 

of purchase on hand. 

The guarantee is subject to the following provisions: 

• It is only valid within the boundaries of the country of purchase. 

• The product must be correctly installed and operated in accordance with the instructions 

contained in this User Guide. 

• The Speaker Dock must be used solely for domestic purposes. 

• The guarantee will be rendered invalid if the Speaker Dock is re-sold or has been damaged by 

inexpert repair. 

• The manufacturer disclaims any liability for incidental or consequential damages. 

Summary of Contents for IPD-4100/2 Series


















Reviews: