LENCO DVT-224, User Manual

Page: 22 / 38

Video Settings
-Use the / to select Video Settings item and then press ENTER to confirm it
TV Shape
This function allows you to select the proper picture proportion to match the source's image, you can select one of 4 : 3
and 16: 9.
Conversion
This function allows you to select the wide screen mode options: Full / Vert. Cut/ Pillarbox / LetterBox / Pan&Scan.
Brightness
Press / to adjust the value of brightness.
Saturation
Press / to adjust the value of saturation.
Factory Default
Use / to select the Factory Default item and then press ENTER to confirm it
Restore to Defaults
Press ENTER to enter the restore to defaults menu and use ENTER to activate it else use the DVB Menu to return to the
previous menu.
Clear Channels
Press ENTER to enter the clear channels menu and use ENTER to activate it else use the DVB Menu to return to the
previous menu.
Country Select
Press ENTER to enter the country select menu and use / to select the country (Default / France / Australia.)
Timer List
-Use / to select the Timer List item and then press ENTER to confirm it
This function allows you booking the TV program, press ENTER to enter the setting menu:
Event NO.:
Press and then use / to select event id options: 1-5.
Channel
Press ENTER and then use / to select channel which you want to book from the channel list.
19
20
Recurrence mode
Press and then use / to select the event type options: ONCE/ DAILY/ WEEKLY.
Start Time
Press / to select the move cursor and enter the number directly to set the begin time of the channel which you have booked.
Start date
Press / to select the move cursor and enter the number directly to set the begin date of the channel which you have booked.
Duration
Enter the number directly to set the last time of the channel which you have booked.
Status
Press and then use / to select options: ON/ OFF.
System Info
-Use / to select the System Info item and then press ENTER to confirm it
Software Version
-Use / to select the Software Version item and then press ENTER to refer to the version of software.
Hardware Version
-Use / to select the Hardware Version item and then press ENTER to refer to the version of hardware.
Signal Information
-Use / to select the Signal Information item and then press ENTER to refer to the signal quality and strength of signal.
Channel Setting Channel Setting
1. Press the DVD/DVB setup button on the remote control to bring up the main menu on the screen and use / to select
the Channel Setting menu.
2. Press the ENTER to confirm your selection and there will be a Channel Setting menu on the screen.
Channel Setting
-Use / to select the Channel Scan item and then press ENTER to confirm it