LENCO DVP-934, User Manual

Page: 14 / 73

3. SETUP Menu Setting
Preference Page
PAL - Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and
output in PAL format.
NTSC - Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and
output in NTSC format.
Auto: Change the video signal output automatic according to the playing disk format.
Audio: Selects a language for audio (if available).
Subtitle:
Selects a language for subtitle (if available).
Disc Menu: Selects a language for disc menu (if available).
Default: Back to the factory setting.
4. Parameters and specifications
Technical parameters
Item Standard requirement
Power requirements : AC 100-240 V, 50/60 Hz
Power consumption : <10W
Operating humidity : 5% to 90%
O
u
tput
VIDEO OUT : 1 Vp-p (75
Ÿ
)
AUDIO OUT : 1.2 Vrms (1 KHz, 0dB)
Audio : Speaker: 1Wx2, Headphones output
System
Laser : Semiconductor laser, wavelength 650 nm
Signal system : NTSC/PAL
Frequency response : 20 Hz to 20 kHz (1 dB)
Signal-to-noise ratio : More than 80 dB (ANALOG OUT connectors only)
Dynamic range : More than 85 dB (DVD/CD)
Note: Design and specifications are subject to change prior notice.
14