11.2.3 SKIP SWITCH
The unit will setup the program which you want to skip ON/OFF if you select the skip switch.
The main unit will show the following:
Using Up/Down (the main unit or remote controller) to select. and press ENTER (remote
controller )or
(the main unit) to confirm.
If you want to resume the program which you skip on, please press the digit key to select
the number of program which you skip on, then setting the resumed program to skip off.
11.2.4 FINE TUNE
The unit will tune the program in precise steps if you select fine tune.
Use left/right (the main unit or remote controller) to tune.
The main unit will show the following:
11.3 How to select ATV program
You could use CH+/CH- (the main unit or remote controller) to select the program.
Use the digit buttons to select the program what you want.
11.4 How to control the volume
You could use v+ / V- or
to control the volume.
12.
DVB-T MODE
Please press MODE (in the main unit )or DVB in remote controller) to select DVB-T mode.
12.1 Install antenna
Plug the antenna to the antenna socket
12.2 DVB-T SETUP
When SETUP is pressed (the remote controller) or MENU (the main unit) in DVB-T mode,
the unit will be in DVB-T setup status. DVB-T setup main menu is as following:
You could use the cursor key and ENTER to select the correct settings. You could use
to return. You could use SETUP to exit.
26
12.3 Channel Guide
Summary of Contents for DVP-840
Page 38: ...STI1021 EN V0 1 34...
Page 39: ......
