LENCO DF-1520, Owner'S Manual

Page: 7 / 123

For information and support; www.lenco.eu
- 3 -
Installing your unit
•
Open the package and remove the protective foam. Remove the protective sleeve from
the unit.
•
Install the Digital Picture Frame stand as the back of the unit.
•
Plug in the AC adapter into power outlet. Plug the other end into the unit.
•
After the content is stored on the target flash media; insert the media into the correct
slot.
•
Turn power to ON position via the ON/OFF switch.
Connecting to a PC
The Digital Picture Frame has a USB port for connection to a PC (USB Slave) and a second USB
port for connection to other devices such as a Flash Drive, USB card reader, or a camera (USB
Host). When connected to the PC you can drag-and-drop content from the PC to the internal
memory or memory card. You can also delete content from the internal memory.
NOTE: USB Slave and USB Host can not be used at the same time.