background image

USING THE DETACHABLE FRONT PANEL

6

To Detach the Front Panel

1. Press the 

OPEN 

button, then  the front

    panel will slide down.

Front Panel

Protective Case

3. For safekeeping, store the front panel 
    in the supplied protective case
    immediately after being removed.

3. Note that if the front panel fails to lock 
    in position properly, pressing control 
    button may not function and the 
    display may be missing some 
    segments. Press the 

OPEN

    

button and then reinstall the front 

    panel again.

2. To remove the front panel, lift it up at a 
    little angle from horizontal position, then
    first pull out the right side and then pull
    out the left side.

Precautions when handling

1. Do not drop the front panel.
2. Do not put pressure on the display or
    control buttons when detaching or
    reinstalling the front panel.
3. Do not touch the contacts on the front
    panel or on the main unit body. It may
    result in poor electrical contact.
4. If any dirt or foreign substances
    adhered on the contacts, they can be
    removed with a clean and dry cloth.
5. Do not expose the front panel to high
    temperatures or direct sunlight in
    anywhere.
6.

 

Keep away any volatile agents (e.g.

    benzene, thinner, or insecticides) from
    touching the surface of the front panel
7. Do not attempt to disassemble the 
    front panel.

 

O

PEN

 

 

The left side

Front Panel

The right side

To lnstall the Front Panel

1. To install the front panel, first insert the
    left side into proper position then insert
    the right side into place.

 

The left side

Front Panel

The right side

 

2. When the two sides fixed int palce,
    push the front panel into main unit. 
    

Summary of Contents for CS171 USB




















Reviews: