LENCO CS-176 Instruction Manual Download Page 5

      : 

OPERATING   INSTRUCTIONS

1. POWER ON/OFF

By pressing this key(1), the unit is switched on and off.
This unit is turned on by pressing any key.

2. SELECTION TUNING KNOB(SEL)
3. VOLUME UP/DOWN(+/-)

Rotate the VOL.UP(+) and VOL.DOWN(-) knob(3) to control the VOLUME to  select  other 
functions, press the SEL(2) button shortly  until the desired functions is shown on the dis-
play. Figure 1 shows how control functions are selected using the SEL button.

                                       

Fig. 1 Selection of sound control functions

1. VOLUME   2. SELECT  3. BASS 4. TREBLE   5. BALANCE   6.FADER   
Rotate the knob to increase or decrease the volume. These buttons can be used to adjust
the BASS, TREBLE,  BALANCE AND FADER.

When pressed the Audio SEL key continuously for 0.7sec.,some audio setting can be adjusted
for power on initialization.
The list below is sequentially called by shortly pressed of SEL key. Use AUD +/- to adjust the 
value.

TAVOL: Volume level during Traffic Announcement (Minimum 16).
INVOL: Power on Volume level. The volume level is lowered to this value (default INVOL=17).
                                                  Power off           Power on 
                                                Vol > INVOL      Vol = INVOL
                                                Vol < INVOL      Vol = old VOL

Maintenance
FUSE REPLACEMENT

If the fuse blows, check the power connection and replace the fuse. IF the fuse blows again
after the replacement, there may be an internal malfunction. In this case, consult your near
est repairing center.

Warning 

Use the specified amperage fuse for each lead. Use of a  higher amperage fuse may cause 
serious damage.

1

3

4

5

6

2

2

2

2

2

5 5 

English

English

English

English

6 6 

4. PRESET STATIONS(M1,M2,M3,M4,M5,M6)

(A) RADIO MODE:

When press short, these keys select a preset station directly. When press longer
 than 1 sec., current station is stored in preset memory bank. When PTY mode is 
selected, the PTY switch is shared as follows:
PTY music group---PTY speech group---OFF

MUSIC                                            SPEECH
1. POP M, ROCK M                       1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M                    2. SPORT, EDUCATE, DRAMA
3. CLASSICS , OTHER M            3. CULTURE, SCIENCE, VARIED

(B) CD  MODE:

1. PAUSE      2. REPEAT       3. INTRO       4. RANDOM   

(C)  WMA/MP3/SD/MMC/USB  MODE:

1. PAUSE      2. REPEAT       3. INTRO       4. RANDOM     5. -10          6. +10       

USING THE RDS FUNCTION

What is RDS?

The RDS (Radio Data System) is a digital information system developed by theEBU (Euro
pean Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of
 information services and automatic retuning functions for RDS-compatible car stereos.
In1988, RDS became available in the United Kingdom, France, West Germany,  Ireland and
 Sweden. Test transmissions are being conducted in many other European countries. It is
 expected that RDS will be available in most western European countries in the near future.

5.

 “AF/REG” f

unction(ALTERNATIVE FREQUENCIES)

   When press short, AF/REG switching mode is selected.
   When AF/REG switching mode is selected, the radio checks the signal strength of the AF
   all the time. When press long, it is activated as regional mode ON/OFF.

  

 -Regional mode ON:

   AF switching or PI SEEK is implemented to the station which have all PI codes same as 
   current station. REG segment is  turned on in LCD display.
 

 

           

Summary of Contents for CS-176










Reviews: