8
4.
Operation
Use the
POWER CABLE
to connect the unit with the power outlet.
POWER ON
Turn the unit on by rotating the
POWER/VOL
located on the front panel to power on the unit.
VOLUME CONTROL
Rotate the
POWER/VOL
on the front panel of the unit to adjust the volume to a comfortable level.
STEPS OF PLAYING RECORDS
Release the
TONE ARM
from the
ARM LOCK/REST
.
SELECT SPEED:
Set the
R.P.M 33
⅓,
45, 78 SELECTION
to the desired speed of the records.
AUTO STOP
Choose whether the records stop automatically when finished playing by the
AUTO STOP ON/OFF
SWITCH
. If the
AUTO STOP ON/OFF SWITCH
turns on, the record will stop turning when it comes to
its end.
Gently place the record on the
TURNTABLE
.
Gently lift the
TONE ARM
and move it to the desired starting point on the records.
LINE OUT CONNECTION
-
Connect the Auxiliary cable (
not supplied
) to the
LINE OUT JACK
on the rear of the record
player and the other end of the cable to the auxiliary inputs of the external component, e.g.
another Hi-Fi unit, Amplifier, etc.
-
Check the volume level of your external component and adjust it if necessary.
-
Refer to the instruction manual of the external component for its correct operation.
SUBWOOFER OUTPUT JACK
The subwoofer output jack enables you to attach an active subwoofer (not supplied) which will
enhance bass response. Please contact your retailer for suitable subwoofer models.
AUX IN CONNECTION & OPERATION
Any component with an Audio Output, such as for instance a DAB Radio module, CD/Cassette Player,
MP3 Player can be connected by using a cable with a 3.5mm dia. jack plug (
a 3.5mm AUX IN cord is
supplied
).
-
Turn the unit on and adjust the volume.
