LENCO BMC-080, User Manual

Page: 7 / 51

7
No. Control
1. Microphone
2. SPEAKERS
3. MIC.Treble Button
(/-)
4. MIC.Bass Button
(Bass +/-)
5. MIC.Volume Button
(/-)
6. MIC.Echo Button
(Echo +/-)
7. Music volume Button
(Music +/-)
8.
Button
(Power On/Off)
9. Charge LED/MODE Indicator
(Bluetooth/AUX IN)
10. MICRO USB/AUX IN socket
(Charge input, DC 5V 1A)
C. About the rechargeable Battery & Charge
a. Regarding the lithium rechargeable battery:
1. This device has an internal, non - user - replaceable battery. For best
results, the first time you use this device, let it charge for about
4 ~ 5 hours or until the “Charge LED (9)” indicator turn to off from
red which shows the battery is fully charged.
2. For maintain the battery life and performance, if device isn’t used for
a while, the battery might need to be recharged. Recharge the
battery at least once per month.
b. To recharge the built - in battery:
You can charge the device’s battery in two ways:
1. Connect it to the Computer. Or,
2. Use the USB power charger. (not included)
c. Connection and Charging:
1. Connect the device’s “Micro USB Socket (10)” with the Computer’s
USB port through the USB cable.
2. The “Charge LED (9)” indicator will light red, the battery is in charging.
3. The “Charge LED (9)” indicator will turn to off when it’s fully charged.
4. Disconnect the USB cable when it is done.
D. Power ON/OFF and Pairing
1. Short press the “ (8)” button to turn on the device, a series of
tones will sound and the “MODE Indicator (9)” will light blue. The
device is in Bluetooth pairing mode.
2. Then activate the Bluetooth function in your mobile device (such as
Smartphone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the related
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)