LENCO 8711902066439, User Manual

Page: 18 / 145

18
Programmed Playback
CD Disc Mode Programming Playback
This unit can be programmed to play a sequence of tracks selected.
1.
In stop mode press the P-MODE button, the display shows the program number “ P01 ” and the flashing
track number.
2. Press the or button to select the desired track.
3. Press the P-MODE button to save the desired track.
4. Repeat steps 2-3 to program up to 20 programmed tracks.
5. Press the PLAY/PAUSE button to start playing the programmed tracks.
6. To clear the program play, press the STOP button twice or change to another mode.
7. During program play you can also do the “Repeat One” or “Repeat All” operation, however intro and
random play is not supported.
MP3 Disc Mode Programming Playback
1. In stop mode press the P-MODE button, the display shows the program number “ P01 ” and the flashing
folder / track number.
2. Press the or button to select the desired track.
3. Press the P-MODE button to save the desired track.
4. Repeat steps 2-3 to program up to 99 programmed tracks.
5. Press the PLAY/PAUSE button to start playing the programmed tracks.
6. To clear the program play, press the STOP button twice or change to another mode.
7. During program play you can also do the “Repeat One” or “Repeat All” operation, however intro and
random play is not supported.
Note:
- Besides playing CDDA audio disc, the unit can also play MP3 file. However, WMA file and others are not
support.
- Folders or files number on the disc that exceed the supported limit of this product cannot be played.
Resume Playback
After pressing the STOP button to stop the playback, press the PLAY/PAUSE button will continue playback
from where you have stopped. To clear the resume playback, press the STOP button twice.
During programming playback, there is no resume playback.