Many thanks for purchasing our most advanced mains flash system, the Lencarta UltraPro 300, or
UltraPro 600.
First, let’s talk about the body of the UltraPro flash heads, the body is the same for both models.
The body is made from extruded aluminum, it’s tough, lightweight and also provides a high level of
additional electrical insulation. The colour has been added during the manufacturing process, so
although we’re sure that you will want to take care of your equipment, it’s good to know that it is highly
resistant to scratches.
If you’re using extremely heavy light shapers (for example a beauty dish) you can obtain perfect balance
simply by loosening the 2 screws that attach the adjustment handle to the body, and sliding the
assembly to the position that balances the head correctly.
If you want to use your UltraPro on an overhead track system, just remove the screws completely and fit
the handle assembly to the top of the unit.
The tilt adjustment handle allows one-handed
adjustment, just twist the handle anti-clockwise to
loosen it, make the adjustment and tighten it again.
