ASSEMBLY AND INSTALLATION INSTRUCTIONS
3.. Seat
Attaching the Adjustment Handles to the Seat Carrier
1. Locate the seat adjustment handles. They can be
found in the plastic bag containing the tools and
other hardware.
2. The shorter, L-shaped handle is attached to the left
side of the bike and controls the seat angle adjust-
ment. Slide the handle onto the post on the left
side of the seat carrier so that the set screws make
contact with the flat portion of the post. Tighten
the (2) set screws at the top of the handle with the
2.5 mm hex wrench.
3. The longer handle controls the fore/aft adjustment of the seat and is located on the right side of
the bike. Align the (2) holes of the handle with the (2) holes on the right side of the seat carrier.
Attach the handle with (2) M5x25 screws and tighten using the 3mm hex wrench.
Attaching the Handlebars to the Seat Assembly
Attach the handlebars to the seat assembly before attach-
ing the seat to the body of the bike.
1. Turn the seat assembly upside down so that the
seat rails and the seat back touch the floor.
2. Insert the handlebars into the seat assembly with
the holes on the handlebars facing up and aligned
with the holes on the seat carrier.
3. Secure the handlebars to the seat assembly by sliding (4) star washers onto each of the (4)
M8x20 screws and tighten using the 6mm hex wrench.
Attaching the Saddle to the Seat Assembly
1. Place the seat bottom on the rails of the seat
assembly.
2. Attach the seat bottom to the seat assembly by
sliding (4) star washers onto each of (4) M8x50
screws and tighten using the 6mm hex wrench.
Summary of Contents for G-Force RT
Page 1: ...ASSEMBLY INSTRUCTIONS...
