Lemona CL-658DV, User Manual

Page: 6 / 8

mode. If the lens senses a moving object peripherally, the data recorder enters
the video recording state. If the lens does not sense any moving object within 60
seconds, the data recorder stops video recording. To exit the motion detection
mode, enter the menu again, and set the state of the <Motion Detection> option
to <Off>.
[Prompt] If you need to use the motion detection function for a long period,
purchase portable power supply separately.
5. Collision Sensing
The DVR is fitted with a built-in collision sensor (G-sensor). In case of
severe vehicle collision, the DVR locks the image data generated at the time of
the accident, and displays a lock icon in the middle of the screen.
[Prompt] The collision sensor (G-sensor) supports sensitivity adjustment.
By default, sensitivity adjustment is <Off>. You can change the sensitivity
settings as needed in the setting menu.
6. Date and Time Setting
In standby state, press the <Menu> button twice to enter the system setting
menu. Press the <Down> button to move the cursor to the <Set the date> option.
Press the <OK> button to confirm it, and enter the <Setting> menu.
[Prompt] Press the <Up> and <Down> buttons to select values, press the
<Menu> button to proceed to the next option, and press the <OK> button to
confirm the option and then exit.
[Note] To effectively record the date and time of obtaining the evidence of
the traffic accident, set a correct date and time before using the DVR.
7. USB Mode
Connect the data recorder to the USB interface of a PC by using a data
cable. Then, the screen displays two modes: memory and camera. Press the
<Up> or <Down> button to select the <Memory> option. Press the <OK>
button to enter the USB flash disk mode.
[Prompt] When you use a PC to copy a video-recording file, it is
recommended that you use a card reader to copy the video-recording file in the
TF card to the PC.
8. Playback of Recording File
In power-on state, press the <MIC> button twice to enter the playback
mode. Press the <Up> or <Down> button to find the desired type of file, and