21
-
End single line:
to end the current active call
-
End all:
to end the current call(s)
-
Phone book:
to access the phone book
-
Message:
to access the message menu
-
Audio recording:
to record an audio file
-
Mute/restore:
not to send/ to send local voice of the call
*Note: Some items can only appear under specific circumstances. For example, “switch”
will appear only when a call in dialogue and a call held on coexist.
Chapter five: FAQ
1.1 Why does the phone prompt “Please insert SIM card”?
1. The SIM card is in poor contact with the phone or the SIM card has not been inserted
into the phone.
2. Replace with a new SIM card and try again. If the phone is in good condition, it means
the original SIM card is defective. Please contact the SIM card operator.
3. If the surface of SIM card or the SIM card interface shows a sign of oxidation. Please
use ethanol to clean it; or use clean soft cloth to wipe it.
4. If all the above prove ineffective, please contact ××× service center or go to ×××
maintenance store for repair and test.
1.2 How to get and use the PIN, PIN2, PUK, PUK2 codes and restriction password?
1. Please contact the local operator for inquiry.
2. If a wrong PIN code is input for three consecutive times, the SIM card will be locked.
3. Please contact SIM card operator for the inquiry of PUK code.
1.3 Frequent occurrence of network failure
1. You might be in a place with weak signals or shield. Please leave the place and try
again.
2. The phone needs inspection and test. Please contact ××× service center or go to ×××
maintenance store for repair and test.
1.4 Your voice can not be heard at the other end.
1. First make sure whether it is a problem of network. Then try again.
2. You might be in a place with poor network connection. Please leave the place and try
again.
3. This may caused by the poor relay connection of the network operator.
4. If all the above proves ineffective, please contact ××× service center or go to ×××
maintenance store for repair and test.
1.5 Charging failure or charging without any indication
1. It might be due to poor contact between the charger and the phone. Please make sure
the connection is reliable.
2. During charging, the phone will display “Charging” only when it is power-off. There is
no indication of “Charging” when it is switched on.
1.6 Intermittent signals
1. If you are in a place with unstable local network signal, the phone might indicate
unstable signals. Please leave the place and try again.
2. If all the above prove ineffective, please contact ××× service center or go to ×××
maintenance store for repair and test.
1.7 Unable to call
1. You might be in a place with poor signals. Please move to a place with stronger
signals.
2. Local network operator might be busy now. Please try to call later.
3. If all the above prove ineffective, please contact ××× service center or go to ×××
maintenance store for repair and test.
1.8 Short standby time
1. The standby time of the phone might change according to different network signals in
different places.
2. It is affected by many factors including ambient temperature, distance from the base
station, etc.
Summary of Contents for i T414
Page 1: ...User s Manual i T414...